The cleaned soybeans transported from the raw material silo first enter the measurement，then the measured soybeans be cleaned, and the cleaned soybeans enter into the conditioning tower，the temperature and moisture of the soybeans be adjusted in the tower. The conditioned soybeans enter into the first cracking roll, and the cracked soybeans enter the soybean hull separator to separate the hulls; then the soybean enter the secondary cracking and then enter the kernel hull separator to separate the soybean hulls. The peeled soybean enter the flakers for flaking, the flake thickness is about 0.3mm.The flakers adopts hydraulic tight roller type, which has a large output, low power, and good quality of flake, which is more conducive to the expansion of soybean flake. After flaking, the flakes enter the oilseed extruder for expanding, and the extruded material from the extruder is dried and sent to the extraction plant for extracting.
The soybean husks separated by the kernel hull separator are discharged to the husk - kernel separator through a fan and cyclone, and the soybean kernel separated by the husk - kernel separation screen returned to the production line; The screened husks enters the secondary air separator for further separation, and the separated soybean particles returned to the production line. The separated husks is unloaded to the husks storage box for temporary storage through a fan and cyclone.
Performance quality of processes and equipment
(1) Equipment quality: The equipment runs smoothly, has low noise, fewer mechanical faults, is easy to operate and maintain, and all connections are free from running or emitting phenomena.
(2) Process performance: The average process performance level and various economic and technical indicators have reached the advanced level of the domestic industry during operation.
(3) The operating equipment is equipped with an electrical interlocking control system, with a high safety factor.
(4) Adopting a computer automation control system, with computer display, control, and recording. The workshop is equipped with an independent control room for centralized control; Equipped with a large screen analog control screen, equipped with automatic alarm and interlocking control; Temperature, pressure, material level, and flow automatic control instruments ensure that the operation of the workshop can be understood and controlled in the control room.
